VTP

Create three switches.
Connect Switch0 to switches 1 and 2 with cross-over cables.
Set the links to be trunks: "switchport mode trunk" on either
or both ends.
Create a VTP Domain in Switch0: "vtp domain NAME"

In Switch0: "show vtp status"
Configuration Revision:____
Number of existing VLANs:______
VTP Operating Mode: ________
VTP Domain Name:_______

In Switches 1 and 2, change the VTP mode to client: "vtp mode client"
Now in Switch2:
Configuration Revision:____
Number of existing VLANs:______
VTP Operating Mode: ________
VTP Domain Name:_______

In Switch0 (the VTP server), create Vlan 2 with a Name: "vlan 2" "name NAME"
Configuration Revision:____
Number of existing VLANs:______

In Switch1:
Configuration Revision:____
Number of existing VLANs:______
"show vlan" displays what new VLAN:_________________

In Switch1, try to create a VLAN.  What results:
____________________________________________________