CMIT 350
Name:________________________________________

Use ESim.

Configure the routers so that their 
hostnames are Lab_X etc, 
their enable password, enable secret, console and telnet passwords are their hostnames in lower case (note: add one 
addtional character to the secret password), 
their interfaces are assigned the IP addresses indicated in the diagram.
 
Note: Ignore the 'sh ip route' command.  It only works for the original configuration.  
Skip rip.  ping and trace won't work.


For each network, indicate the mask, the number of host IP addresses and the broadcast address:

Subnet                   Mask                    #host IPs            Broadcast
---------             ---------------           ------------        -------------
10.0.0.0/30

10.0.0.4/30

10.0.0.8/30

10.0.0.32/27

10.0.0.64/26

10.0.0.128/27

10.0.0.160/27

10.0.0.192/26


In the "Subnetting a Class C network", write the subnet number in its correct "slot".


Ctrl F resizes to a window.    Position the output of 
'show running-config' so that the hostname, enable and interface commands are visible.
Alt PrintScreen copies the window.  Paste into Word or Paint Shop Pro and crop 
(in PSP: use the Selection to indicate what's being selected and then Image -- Crop to Selection)
(in Word: I don't know).  Paste that into Word.
Repeat for the other routers.  3 routers can fit on one page (reduce the margins).
Print it and turn it in, along with this and the "Subnetting Class C network"