CMIT 350 From XP cmd: Download the esim from the TFTP server: tftp -i 192.168.0.197 get esim.exe Run the esim. For each router assign it its name, set the enable secret password to 'class', set the console and vty paswords to 'cisco', and assign the specified IP address to every interface and the clock rate for the DCE ends (i.e. the S0s). Configure RIP for each router and specify the networks each advertises. Test the configuration of the internetwork by pinging from each router to every other (or some reasonable subset). The simulator is finicky. It will only work if the IP addresses are exactly as in the Topology. But it is a good way to get practice with IOS commands.