CMIT 350 Exam Name:____________________________ Using the exam.pkt Write the networks, using prefix notation: R0--R1 ___________________ R0--R2 ___________________ R1--R3 ___________________ R2--R3 ___________________ R0's Fa0/0 ___________________ R0's Fa1/0 ___________________ Configure Switch1 so that it can be accessed from the internetwork. What command did you do:___________________________________ How much NVRAM does R0 have:__________ *************************** Attach a switch to R1. Attach a PC to this switch. This will be the 192.168.1.128/26 network. Assign the network's first host IP address to R1's port:_________ assign the network's last host IP address to the PC:__________ and assign any other valid IP address to the switch:__________ Add a static route on R0 to R1's Ethernet. Add a static route on R1 to R0's Fa1/0 network. Paste the routing table of R1: _______________________ Paste the tracert from the new PC to Switch1: _______________________ *************************** On Switch1 ping PC1, R0's Fa1/0 and R0's Ser3/0. Paste the contents of Switch1's MAC address table: _______________________ *************************** Attach a switch to R2. Attach a PC to this switch. Use whatever network number you want. Assign the network's first host IP address to R2's port:_________ assign the network's last host IP address to the PC:__________ Configure RIP-2 on all the routers. Paste the routing table of R0: _______________________ Paste the traceroute from R3 to PC1: _______________________