CMIT 265

Name:__________________

Netgear WAP (wireless access point)
What is its SSID:___________________
What is its "radio type":_______________
Connect to it.
What IP network is it in:________________
What is its IP adddress (assuming its the default gateway and DHCP server):____________

Can it be pinged:___________
What are the ping times:_________________
What does arp say its MAC address is:___________________
What ports does nmap indicate are available:________

Browse to the WAP
Use the default username and password of
admin  
password
Do not make any changes to its configuration, just look.

This WAP is mimicking a typical home/small office setup
where it is connected to its ISP's network thru its "Internet
port" ("WAN") and the home network thru its wireless (WLAN) 
and LAN ports.  Here the Linksys WAP/router is acting as the ISP's router.

The information below can be gotten by using the Basic Settings,
Wireless Settings, Router Status (and Show Statistics and Connection Status),
Port Forwarding, LAN IP Setup, Remote Management  pages.

Is its "Internet IP address" static or dynamic:__________
What is this IP address:________________
If it's dynamic, what DHCP server is used:_____________
If it's dynamic, how long is the lease valid for:____________
What is this port's MAC address:___________________
What default gateway does it use:____________
What DNS server does it use:_____________

What is its wireless network name (SSID):_______________
Is it broadcasting (beaconing) its name:________
What channel (frequency) is it using:________________
Does it allow access from ANY? (meaning a node/station doesn't have to know the
SSID) ______________

What is its IP address on its "LAN port":______________________
What is this port's MAC address:___________________
How do the MAC addresses of the "Internet" and "LAN" 
ports differ:_________________
How do the MAC addresses of the "LAN" and Wireless ports compare:_______________

What is the range of IP addresses that the WAP as a DHCP
server hands out:________________

What are the IP address, name and MAC address of 
attached devices (associated wirelessly or cabled)
[is actually a list of DHCP clients]
_______________________________________
_______________________________________
_______________________________________

What are the speeds (bandwidths) of the WAN, LAN, and WLAN:
____________________________________

What are the network addresses of the two networks that the WAP
router interconnects:______________________

IP address of the farside port:____________
Can you ping the farside of the WAP router:_______
Can you ping the WAP router's default gateway :_______

Is "remote management" turned on:_______

Now disconnect from this WAP.
Connect to the Linksys6.
Your new IP address:______________ (if it's not in the 192.168.100.0 network it's wrong.)
Can you ping the Netgear WAP "Internet" port:______
What does port scanning it reveal:______________
Point your browser to the Netgear "Internet" port.  What results:____________
So now point your browser there but appending :8080
You've come in thru its "Internet" port.


**************  SKIP ******************************
What ports are "forwarded" to any other computer:
_____________________

telnet to the WAP
login with the student Password account.

It's a Linux box, so what is its IP address:____________________
************** END SKIP *****************************