CMIT 265
Name:______________________________


Network printers:

Start | [Settings | ] Printers and Faxes | select a printer, Properties |Ports
(select known network (typically laser) printer, )
"Standard TCP/IP Port" contains IP address of network printer.
____________________

(I'm assuming you're doing this in the classroom lab, referring to the
printer in there).

If able, "Configure Port" to confirm the IP address.
         Port number: ____________________
         SNMP is enabled?:____
           If yes, what Community string: ________


Do a nmap port scan of that host.
What ports is it listening on:_________________________________
What service is port 9100: ________________
nmap -O  extra information:
____________________________
____________________________
____________________________
____________________________

The LED on the network port of the printer indicates what:
__________________________

Browse to that IP address. (maybe need to add :280 to IP address?)
It runs a Java applet, somewhat flaky?)
Do not change any settings!
Make and model:____________________________
Serial number:____________________________
Firmware Datecode:_____________________
How much toner remains:_____
How much memory does the printer have:__________________
How many pages have been printed: (it's a new printer)___________
How many total packets has the printer received: ______________
How many unicast packets has the printer received: ______________
How many broadcast packets has the printer received: ______________
How many total packets has the printer sent: ______________
How many unicast packets has the printer sent: ______________
How many broadcast packets has the printer sent: ______________

what's its host name:__________________
what's its default gateway:__________________
what's its DNS server:__________________
what is its data rate:_________________

What access control is in effect:
_______________________________

****************************************************************
The printer in the lab is at 192.168.0.205
What ports is it listening on:________________________
Browse to it.
(Some of the tabs are password protected but we can find out the below)
What is the make and model:___________________
How much toner is remaining:_______________
How much SDRAM (total memory) does it have:_____________
How many pages have been printed:__________________


****************************************************************
Logon to Linux at 192.168.0.197 as user 'cmit265'
View the /etc/cups/printers.conf file with the 'more' command.
CUPS is the Common Unix Printing System.
What are the IP addresses and names ("Info") of the three printers:
____________________________
____________________________
____________________________
Indicate with a * the default printer.

'lpr' prints a file (to default printer). Print the 'lanwan.gif' file.



**  SKIP  *********************
Howto: Configuring IP network printer:
Printers and Faxes | Add a new printer wizard
Local printer (yes, counterintuitive)
Create a new port
Type: Standard TCP/IP port
IP address of it